Asus PFQ3 Computer Hardware User Manual


 
ASUS P5Q3 Deluxe/WiFi-AP@n 2-13
2.4.2 Memory congurations
You may install 1GB, 2GB and 4GB unbuffered and non-ECC DDR3 DIMMs into
the DIMM sockets.
You may install varying memory sizes in Channel A and Channel B. The
system maps the total size of the lower-sized channel for the dual-channel
conguration. Any excess memory from the higher-sized channel is then
mapped for single-channel operation.
It is recommended to install the memory modules from the yellow slots for
better overclocking capability.
Always install DIMMs with the same CAS latency. For optimum
compatibility, it is recommended that you obtain memory modules from the
same vendor.
If you install four 1 GB memory modules, the system may only recognize
less than 3GB because the address space is reserved for other critical
functions. This limitation appears on Windows
®
XP/Vista 32-bit operation
system which does not support Physical Address Extension (PAE).
If you install Windows
®
XP/Vista 32-bit operation system, a total memory of
less than 3GB is recommended.
This motherboard does not support memory modules made up of 128 Mb
chips.
Due to chipset limitation, this motherboard can only support up to 16 GB
on the operating systems listed below. You may install a maximum of 4 GB
DIMMs on each slot.
64-bit
Windows
®
XP Professional x64 Edition
Windows
®
Vista x64 Edition
The default memory operation frequency is dependent on its SPD. Under
the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value.
The memory modules may require a better cooling system to work stably
under full loading (4 DIMMs) or overclocking setting.