Filter
Top Products
20 ASUS P/I-XP55TVP4 User’s Manual
III. INSTALLATION
(Connectors)
III. INSTALLATION
3. Parallel Printer Connector (25-pin Female)
You can enable the parallel port and choose the IRQ through "Onboard Parallel
Port" in Chipset Features Setup of the BIOS SOFTWARE. NOTE: Serial printers
must be connected to the serial port.
Parallel (Printer) Port (25-pin Female)
4. Serial Port COM1 Connector (9-pin Male)
The one serial port can be used for pointing devices or other serial devices. The
second serial port, COM2, requries a cable and bracket set to connect the on-
board connector to an expansion slot opening. Settings can be adjusted through
the "Onboard Serial Port" in Chipset Features Setup of the BIOS SOFTWARE.
COM 1
5. Universal Serial BUS Ports 1 & 2 (Two 4-pin Female Sockets)
Two USB ports are available for connecting USB devices. You must enable the
“USB Function” in PNP and PCI Setup of the BIOS SOFTWARE.
Universal Serial BUS
1
2
6. Floppy drive connector (34-pin block )
This connector supports the provided floppy drive ribbon cable. After connect-
ing the single end to the board, connect the two plugs on the other end to the
floppy drives. (Pin 5 is removed to prevent inserting in the wrong orienta-
tion when using ribbon cables with pin 5 plugged).
Floppy Drive Connector
Pin 1
Floppy Drive Connector