Filter
Top Products
ASUS P5KC 4-17
Some of the following items appear when you set AI Overclocking to
[MANUAL] or [N.O.S.]. The items vary depending on which option you select.
FSB Frequency [XXX]
Displays the frequency sent by the clock generator to the system bus and PCI
bus. Use the <+> and <-> keys to adjust the FSB frequency. You can also type
the desired FSB frequency using the numeric keypad. The values range from 200
to 800. Refer to the table below for the correct Front Side Bus and CPU External
Frequency settings.
PCIE Frequency [XXX]
Allows you to set the PCI Express frequency. Use the <+> and <-> keys to adjust
the PCIE frequency. You can also type the desired PCIE frequency using the
numeric keypad. The values range from 100 to 150.
N.O.S. Mode [Auto]
Allows you to set the Non-Delay Overclocking System mode.
Conguration options: [Auto] [Standard] [Sensitve] [Heavy Load]
Turbo N.O.S. [Overclock 5%]
Allows you to set the maximum overclock percentage for the selected N.O.S.
mode. Conguration options: [Overclock 3%] [Overclock 5%] [Overclock
10%] [Overclock 15%] [Overclock 20%] [Overclock 30%]
CPU Ratio Control [Auto]
Conguration options: [Auto] [Manual].
The following item appears when the CPU Ratio Control item is set to
[Manual].
Ratio CMOS Setting [7]
This item appears only when you set the CPU Ratio Control item to
[Manual]. Allows you to set the ratio between CPU Core Clock and the FSB
Frequency. Use the <+> and <-> keys to adjust the ratio between 6 and 7. If
an invalid ratio is set in CMOS, then actual and setpoint values may differ.
FSB/CPU External Frequency Synchronization
Front Side Bus CPU External Frequency
FSB 1333 333 MHz
FSB 1066 266 MHz
FSB 800 200 MHz