Asus Q87M-E Computer Hardware User Manual


  Open as PDF
of 77
 
ASUS Q87M-E
2-27
The system automatically set itself to sleep when the partition size is
not enough for Rapid Start Technology to work. Conguration options:
[Enabled] [Disabled]
Active Memory Threshold [0]
Key in the value for the additional partition size for Rapid Start Technology
to work.
Ensure that the caching partition size is larger than the total memory size.
Hybrid Hard Disk Support [Disabled]
Allows you to enable or disable hybrid hard disk support. Conguration
options: [Enabled] [Disabled]
Intel
®
Smart Connect Technology [Disabled]
ICST Configuration [Disabled]
Allows you to enable or disable the ISCT conguration. Conguration options:
[Enabled] [Disabled]
DeepSx Power Policies [Disabled]
Allows you to congure the DeepSx Mode. Conguration options: [Disabled] [Enabled in S5]
[Enabled in S4-S5].
2.6.4 SATA Conguration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA
port.
SATA Mode Selection [AHCI]
Allows you to set the SATA conguration.
[Disabled] Disables the SATA function.
[IDE] Set to [IDE] when you want to use the Serial ATA hard disk drives as
Parallel ATA physical storage devices.
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI
(Advanced Host Controller Interface). The AHCI allows the onboard storage
driver to enable advanced Serial ATA features that increases storage
performance on random workloads by allowing the drive to internally
optimize the order of commands.
[RAID] Set to [RAID Mode] when you want to create a RAID conguration from the
SATA hard disk drives.
IDE Legacy / Native Mode Selection. [Native]
This item appears only when you set SATA Mode Selection to [IDE] and allows you to select
the IDE legacy or native mode. Conguration options: [Native] [Legacy]
Aggressive LPM Support [Auto]
This item appears only when you set SATA Mode Selection to [AHCI] and allows you to
enable or disable PCH entering link power state aggressively. Conguration options: [Auto]
[Disabled] [Enabled]
 previous next