Filter
Top Products
2-27ASUS TS300-E8-PS4
Back side
The back side of the SATA/SAS backplane faces the rear panel when installed.
This side includes the power connectors and SATA/SAS interfaces for the
motherboard Serial ATA connectors or the SAS card.
Connectors Description
SGPIO1
Connects to SATA SGPIO1 connector on the motherboard
SGPIO2
Connects to SAS SGPIO2 connector on the motherboard
SGPIO3
Connects to SAS SGPIO3 connector on the motherboard
BPSMB1
Connects to Front panel SMB connector on the motherboard
U1
Connects to 4-pin plug of the power supply
BP_Connector
Connects to the BP connector on the second SAS backplane
(optional)
CON1/CON2/
CON3/CON4
Connects to SATA/SAS connectors on the motherboard
Move the
SGPIO_SEL1
jumper on the SATA/SAS backplane to 2–3 when
installing the PIKE RAID card.
SGPIO1
SGPIO2
BPSMB1
U1
CON1
CON2
CON3
CON4
SGPIO_SEL1
BP_Connector
SGPIO3
BP_Connector