Filter
Top Products
USB-N53 Wireless Dual-band Adapter Manual
18
ASUS Wireless Dual-band Adapter
Wireless Network Key (WEP) -
This option becomes congurable when you
select WEP in the Data encryption eld. 64-bit WEP key uses 5 ASCII characters
(10 hexadecimal digits). 128-bit WEP key uses 13 ASCII (26 hexadecimal digits).
Key Format -
Allows you to select the key format.
Manual Assignment (WPA and WPA2)-
Allows you to assign WEP Keys
manually.
Key Length -
Allows you to select the key length. For 64bits encryption, each
key consists of 10 hexadecimal digits or 5 ASCII characters. For 128bits
encryption, each key consists of 26 hexadecimal digits or 13 ASCII characters.
Select one as your Default Key -
Allows you to select one of the four WEP
Keys as the default key.
Conguration - Advanced
This Advanced page is intended for
experienced users to set up additional
parameters for the WLAN card. We
recommend that you keep the default
values.
RTS Threshold (0-2347) - The Request
to Send/Clear to Send (RTS/CTS) function
is used to minimize collisions among
wireless stations. When RTS/CTS is enabled, the router refrains from sending a data
frame until another RTS/CTS handshake is completed. Enable RTS/CTS by setting a
specic packet size threshold. The default value (2347) is recommended.
Fragmentation Threshold (256-2346) - Fragmentation is used to divide 802.11
frames into smaller pieces (fragments) that are sent separately to the destination.
Enable fragmentation by setting a specic packet size threshold. If there is an
excessive number of collisions on the WLAN, experiment with different fragmentation
values to increase the reliability of frame transmissions. The default value (2346) is
recommended for normal use.
Preamble Mode - Select the preamble mode. The default value is Auto.