Filter
Top Products
2-2 Chapter 2: Setup
2.2 Detaching the arm/stand
(for VESA wall mount)
The detachable stand of the VB195/ VB191/ VB175/ VB171 Series LCD monitor is
specially designed for VESA wall mount.
To detach the arm/stand:
1. Remove the arm cover.
2. Have the front of the monitor face down on a table.
3. Use a screwdriver to remove the three screws on the stand of the monitor as
the below drawing shows.
4. Detach the arm from the monitor.
• We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• Hold the stand of the monitor when you remove the screws.
The VESA wall mount kit (100 mm x 100 mm) is purchased separately.
screws