Filter
Top Products
2-22-2
2-22-2
2-2
Chapter 2: SetupChapter 2: Setup
Chapter 2: SetupChapter 2: Setup
Chapter 2: Setup
2.2 Detaching the arm/stand
(for VESA wall mount)
The detachable stand of the VW192 Series LCD monitor is specially
designed for VESA wall mount.
To detach the arm/stand:
1. Remove the rear cover.
2. Have the front of the monitor face down on a table.
3. Use a screwdriver to remove the two screws on the stand of the
monitor as the below drawing shows.
4. Two other screws show after you remove the screws on the stand.
Repeat step 3.
• We recommend that you cover the table surface with soft cloth to
prevent damage to the monitor.
• Hold the stand of the monitor when you remove the screws.
The VESA wall mount kit (100 mm x 100 mm) is purchased separately.
screwsscrews
screwsscrews
screws
RearRear
RearRear
Rear
covercover
covercover
cover