Filter
Top Products
Disassembly Procedure
2 - 10
LCD Module
The illustrations below show how to remove and disassemble the LCD module. The
module contains LCD panel, Inverter board, LCD Hinge bracket, Hinge cover, LCD
front cover, LCD back cover
Removing LCD Module
1. Remove 6 rubber pads and 6 screws (M2.5 x 4L) from LCD module.
2. Prying the inside edges of the top front bezel, then separate it from LCD back
cover and take LCD front bezel away.
3. Disconnect the cable and remove 1 screw then take away Inverter board and
disconnect the LCD cable.
LCD
MODULE
LCD
REMOVAL
M2.5*4L