Filter
Top Products
42 ASUS Xonar Essence ST
• Check if you are using a Dolby Digital Live encoder through the S/PDIF
output. If this is the case, the analog output is muted to get rid of any
interference between your digital speaker system and analog speakers
or headphones.
• Try rebooting your computer.
I cannot hear any sound from the S/PDIF output.
• Ensure that you have enabled S/PDIF output in the Xonar Essence ST
Audio Center.
• Ensure that you have connected the correct S/PDIF output jack on the
card to the decoder’s (AV receiver) S/PDIF input jack.
• You may need to select the correct input and mode of your decoder or
AV receiver. For Dolby Digital output, double-check that the AV receiver
is in that decoding mode.
• If you are using 192KHz PCM output, ensure your decoder can support
192KHz decoding. Try changing it to 44.1K or 48KHz rst.
I cannot hear audio input (Mic, Line-in, or AUX) from my speakers.
• Go to the Mixer recording page in the Xonar Essence ST Audio Center
and select the correct input as the recording source. If you are using
Windows
®
Vista, go to the system audio control panel to ensure that the
current default recording/input device is correct.
• Remember to turn on the digital monitoring button for that recording
source.
I cannot hear the TV tuner audio from my speakers.
• If you are using a traditional TV tuner card that has an analog audio
output, connect it to the Aux-In header on the audio card.
• Select Aux-In as the recording source and remember to turn on the
digital monitoring button on the recording mixer page.
• IIf you are using a TV tuner card which has a digital audio output instead
of an analog output, check that the sound is not muted and whether
other applications can play sound out. If you still have problems, read the
TV tuner card’s software user manual.