Asus Z87WS Computer Hardware User Manual


 
6-8
Chapter 6: Multiple GPU technology support
Chapter 5
6.2.2 Installing two SLI-ready graphics cards
The following pictures are for reference only. The graphics cards and the motherboard
layout may vary with models, but the installation steps remain the same.
Goldngers
SLI bridge
1. Prepare two SLI-ready graphics cards.
2. Insert the two graphics cards into the
PCIEX16 slots. If your motherboard
has more than two PCIEX16 slots,
refer to Chapter 1 in this user manual
for the locations of the PCIEX16 slots
recommended for multi-graphics card
installation.
3. Ensure that the cards are properly
seated on the slots.
4. Align and rmly insert the SLI bridge
connector up to the goldngers on each
graphics card. Ensure that the connector
is rmly in place.
5. Connect two independent auxiliary
power sources from the power supply to
the two graphics cards separately.
6. Connect a VGA or a DVI cable to the
graphics card.