Asus Z97-K Computer Hardware User Manual


  Open as PDF
of 90
 
1-22
Chapter 1: Product introduction
12. Chassis intrusion connector (4-1 pin CHASSIS)
Thisconnectorisforachassis-mountedintrusiondetectionsensororswitch.Connect
one end of the chassis intrusion sensor or switch cable to this connector. The chassis
intrusionsensororswitchsendsahigh-levelsignaltothisconnectorwhenachassis
componentisremovedorreplaced.Thesignalisthengeneratedasachassisintrusion
event.
Bydefault,thepinlabeled“ChassisSignal”and“Ground”areshortedwithajumper
cap.Removethejumpercapsonlywhenyouintendtousethechassisintrusion
detection feature.
Z97-K
Z97-K
Chassis intrusion connector
PIN 1
+5VSB_MB
Chassis Signal
GND
CHASSIS
 previous next