Filter
Top Products
Chapter 3.
Basic Operation
Manual Switching
There are two convenient methods to access the computers: Manual - which involves
pressing the pushbutton port selection switches located on the unit’s front panel; and
Hotkey - which involves entering combinations from the keyboard. Hotkey port
selection is discussed in the next chapter.
For manual port selection:
M Press and release a port selection switch to bring the KVM focus to the computer
attached to its corresponding port. The USB and Audio focus does not change - they
stay with the port that they are already on.
M Press and hold a port selection switch for more than 2 seconds to bring the KVM
focus, plus the USB and Audio focus to the computer attached to its corresponding
port.
M Press and hold port selection switches 1 and 2 for more than 2 seconds to start Auto
Scan Mode (see p. 15 for Auto Scan Mode details).
M Press and release either port selection switch to stop Auto Scan Mode. The KVM
focus goes to the computer attached to the corresponding port of the switch you
pressed.
Hot Plugging
The Master View CS-1762 / CS-1764 supports USB hot plugging - components can be
removed and added back into the installation by unplugging their cables from the USB
hub ports without the need to shut the unit down.
2004-06-04
11