Filter
Top Products
Before installing your G-CV160, please make sure your
Macintosh is powered OFF.
Installation without a KVM switch:
1. Connect your PS/2 keyboard and mouse to
the PC ports on the G-CV160.
2. If you have an older Macintosh with DB-15
(Mac video) connectors, connect your
monitor to the PC video port on the G-
CV160. If you’re connecting the G-CV160
to a new G3, G4 or other Macintosh with
HDB-15 video connectors, you can bypass
the video portion of the G-CV160 and
connect the monitor switch directly to your
Mac.
3. Connect the Mac ports on the G-CV160 to
your Macintosh computer.
4. If you have any extra ADB devices (besides
the typical mouse and keyboard),
connect them to the 2
nd
ADB port on the
side of the G-CV160.
InstallationInstallation
4