Filter
Top Products
- 10 -
No. Component Description
1 Console Audio Ports Your console speakers and microphone
plug in here.
2 Console Monitor Port Your console DVI monitor plugs in here.
3 Port LEDs The Port LEDs indicate status.
The LED lights on to indicate that the
computer attached to the corresponding
port is selected and has the KVM focus.
The LED flashes to indicate that the
computer attached to its corresponding
port is being scanned by the Auto Scan
function.
The LED is off to indicate the port is not
selected.
4 KVM Cable The connectors on the built-in KVM
cables attach to the two computers in
your CS682 installation. See the diagram
on page 12 for further details.
5 Console Keyboard
Port
Your console USB keyboard plugs in
here.
6 Console Mouse Port Your console USB mouse plugs in here.
7 Remote Port Selector
Jack
The Remote Port Selector plugs in here.
8Port Selection
Pushbutton
Press the Port Selection Pushbutton to
toggle the KVM and Audio focus
between the two computers.