Filter
Top Products
MULTILANGUAGE MANUAL
NetFly 300 44
Before starting procedure, be sure that:
- There isn’t any AP in WPS mode active.
- Access Point that are in WPS mode have finished
its scan for devices.
1. Set Enrollee mode in Config Mode.
2. Click on PBC button to start sincronization process between AP
and client.
3. Press PCB button on AP.
For more informations:
http://www.wi-fi.org/files/kc_80_20070104_Introducing_Wi-Fi_Protected_Setup.pdf
http://www.wi-fi.org/files/wp_18_20070108_Wi-Fi_Protected_Setup_WP_FINAL.pdf
5.6 Radio On/Off
It can enable or disable RF module.
5.7 About
This screen shows informations about driver and utility version.
Please see this screen before download driver upgrade from www.atlantis-
land.com
.