Filter
Top Products
ENGLISH
21
• The PowerLine Ethernet Adapter should never be placed
near or over a radiator or heat register, or in a built-in
installation unless proper ventilation provided.
•
The PowerLine Ethernet Adapter should be operated from
the type of power indicated on the marking label. If you
are not sure of the type of power available, consult your
dealer or local power company.
• The PowerLine Ethernet Adapter relies on the building’s
electrical installation for short-circuit (over current)
protection. Ensure that a fuse or circuit breaker no larger
than 230 VAC is used on the phase conductors (all
current-carrying conductors).
• Plug the PowerLine Ethernet Adapter directly into a 230V
AC wall outlet. Do not use an extension cord between the
adapter and the AC power source.
•
Do not attempt to service the PowerLine Ethernet Adapter
yourself, as opening or removing covers may expose you
to dangerous voltage points or other risks as well as ruin
product warranty. Refer all servicing to qualified service
personnel.
• Unplug the PowerLine Ethernet Adapter from the wall
outlet and refer the product to qualified service personnel
for the following conditions:
•
If liquid has been spilled into the product.
• If the product has been exposed to rain or water.
•
If the product does not operate normally when the
operating instructions are followed.
• If the product exhibits a distinct change in
performance.
Product warranty does not apply to damage caused by
lightning, power surges or wrong voltage usage.