Filter
Top Products
ENGLISH
A02-UP1-W54 31
If selected AP supports WEP or WPA/WPA2 You have to
chose Authentication and Security tab in order to connect to
the wireless network.
For more detailed instructions on configuring and using the
Wireless USB Adapter, please refer to the online manual.
4 Uninstallation
To uninstall the Wireless USB Adapter, go to the Control Panel of your system.
• Open the Add/Remove Programs.
• Select the Ralink Wireless Lan Card in the Add/Remove Programs and then
click on the Remove.
• Click on Remove ALL [or Overwrite the older version install without
remove].
• Then chose Yes, I want to restart my computer and click Finish.
• Now You can remove the Adapter.
5 Troubleshooting
Common Problems and Solutions
This chapter provides solutions to problems that may occur during the installation and
operation of the WLAN 802.11g USB Adapter. Read the descriptions below to solve
your problems.
1. My computer cannot find the Adapter
Make sure the Adapter has no physical damage.
Make sure the Adapter is properly inserted into USB slot.
Try the Adapter in other USB slots.
Try another Adapter in that particular USB slot.
2. Cannot access any network resources from the computer. Make sure that
the notebook PC is powered on.
Make sure that the notebook PC is powered on.
Make sure that the Adapter is configured with the same SSID and security
options as the other computers in the infrastructure configuration.