Atlantis Land A02-UP1-W54 Computer Drive User Manual


 
ENGLISH
54
Wireless Mode: Select wireless mode 802.11 b/g mixed, 802.11b only are supported.
System default is 802.11 b/g mixed.
SSID: AP name of user type. User also can select [Use Mac Address] to display it.
System default is SoftAP-XX.
Country Region Code: eight countries to choose. Country channel list:
Select the country where you are using this Wireless Device,
users are responsible for ensuring that the channel set
configuration is in compliance with the regulatory standards of
these countries. Please chek on the Appendix A fore more
information.
B/G Protection: ERP protection mode of 802.11G definition. User can chose from
Auto, on, and off. System default is auto.
Auto: STA will dynamically change as AP announcement.
On: Always send frame with protection.
Off: Always send frame without protection.
Preamble: Preamble frames. Long preamble (128 bits sync field) and short preamble
(56 bits sync field) are supported. System default is long preamble.
Beacon (ms): The time between two beacons. System default is 100 ms.
TX Power: Manually force the AP transmits power. System default is 100%.
TX Rate: Manually force the Transmit using selected rate. Default is auto.
Channel: Manually force the AP using the channel. System default is channel 1.
Auth. Vs. Security: Authentication mode and encryption algorithm used within the AP.
System default is no authentication and encryption. Please refer t osectin 4.2.3 for
more info.
TX Burst: Ralink’s proprietary frame burst mode. System default is no TX Burst.
No forwarding among wireless clients: No beacon among wireless client, clients
can’t share information each other. System default is no forwarding.
Hide SSID: Don’t display AP name. System default no hide.
Use Short Slot: Slot time. Short slot time is 9 us, long slot time is 20 us. System
default is long slot time.
Auto Channel Selected at next boot: System will make a random channel next boot.
(PCI/PCMCIA device only)
Default: Use system default value.
Click Apply in order to save all settings.