Filter
Top Products
Wireless 108Mbps USB Adapter 9
ENGLISH
4. Wireless Network Utility
4.1 Introduction
After installing the driver, the Adapter provides a convenient and powerful utility
that allows you to set up, configure, and know your networking status easily and
clearly. To launch the utility, just double click the icon.
You will see the icon on the Windows task bar when you finish the installation.
When the icon in the toolbar represents in green color (
), it is properly
connected to the network and if it represents in white color (
), then it is not
connected to the network.
4.2 Disable “Windows XP Wireless Zero Configuration
In Windows XP, it is recommended that you use the WLAN 802.11g Utility. Right
after the installation, before opening the Utility, please follow the steps below to
disable the Windows XP Zero Configuration:
1 Go to “Control Panel” and double click “Network Connections”.
2 Right-click “Wireless Network Connection” of WLAN 802.11g USB2.0
Wireless LAN, and select “Properties”.
3 Select “Wireless Networks” tab, and uncheck the check box of “Use
Windows to configure my wireless network settings”, and then click “OK”.