Filter
Top Products
DIP SWITCH SETTING INDICATORS & ALARMS
The voltage & frequency of the UPS might be re-set by the DIP
Switch on the rear panel of the UPS. The following charts may
bring you clear pictures about how the settings are done by the
DIP Switch.
SUPPORT
If you have any problems with the UPS, please consult this manual.
If you continue to have problems you should contact the dealer where you bought this device. If you have any other questions you can contact the
Atlantis Land company directly at the following address:
Atlantis Land SpA
Viale De Gasperi, 122
20017 Mazzo di Rho(MI)
Tel: +39. 02.93906085, +39. 02.93907634(help desk)
Fax: +39. 02.93906161
Email: info@atlantis-land.com
or tecnici@atlantis-land.com
WWW: http://www.atlantis-land.com
Indicator Color Description Alarm
Utility Mode
Green
S
teady:
Output Load is supplied by Utility.
Blinking:
Polarity error or Ground Fault
None
Backup
Mode
Amber Steady (with alarm):
Output Load is supplied by Battery
Blinking every 5 seconds(no
alarm):Stand by for Utility
recovery to re-start up
Every 2 seconds
before battery Low
and every 1 second
before battery Cutoff.
Fault
Red When Overload, short circuit, or
Output Voltage Abnormal occurs
Buzzer beeps
continuously.
Battery
Replacement
Red Blinking: Battery is weak and
needs to be recharged.
Steady: Battery is dead.
None