Filter
Top Products
ENGLISH
A05-1XAX-C0X_MX02 4
2.2 Install the monitor
Make sure that the computer and monitor’s power are both turned off, before start installation. Please follow the steps to
install your LCD monitor:
1. Signal cable connection: firstly lock the base and knighthead, then Plug one end of the signal cable into computer and
lock the two bolts to ensure firmly grounding. Then plug the other into the monitor and lock the two bolts.
2. Power cord connection: connect the AC adapter and AC power source with power cord. then connect the AC adapter
output to the power input of the monitor.
3. Audio cable connection: Insert one end of the audio cable to the audio output of the PC audio card and the another to
the audio input of LCD monitor.
4. Power on: turn on both of the monitor and computer. After the monitor is power on, the LED lights up green or blue, If
the LED become red and flashing, please check the video signal cable. If LED is off, please press power on switch.