Filter
Top Products
A05-17AM-L02_MX01
13
compatible
Check if the Video Card is Plug & Play
compatible
Check if the D-15 plug pin of Video
Cable is bent
Picture is fuzzy Adjust the Contrast and Brightness
Controls.
Picture bounces or a
wave pattern is present
in the picture
Move electrical devices that may cause
electrical interference.
The power LED is
ON(Red) but there's no
video or no picture.
Computer Power Switch should be in the
ON position.
Computer Video Card should be snugly
seated in its slot
Make sure monitor's video cable is properly
connected to the computer.
Inspect monitor's video cable and rnake
sure none of the pins are bent.
Make sure computer is operational by
hitting the CAPS LOCK key on the
keyboard while observing the CAPS LOCK
LED. The LED should either turn ON or
OFF after hitting the CAPS LOCK key.
Missing one of the
primary
colors(RED,GREEN,or
BLUE)
Inspect the monitor's video cable and make
sure that none of the pins are bent.
Screen image is not
centered or sized
properly.
Adjust pixel frequency(CLOCK) and
PHASE or press hot-key (AUTO)
Picture has color
defects (white does not
look white)
Adjust RGB color or select color
temperature
Poor brightness or
The life time of the back-light is limited. In
30000 Hours the luminance of the light has