Toll free: 1-877-536-3976
Local: 1-408-962-0515
3
The Atlona AT-DIS7-PROHD is a 7” testing monitor designed for those looking to test cabling
and the installation of different components. This monitor is useful where displays are in a
remote location or not yet present. This portable display will recognize any HDMI, DVI, VGA or
Component Video source at resolutions up to 1080p or 1920x1200 (including a huge variety
of other HDTV and Computer Resolutions), and allow integrators and installers to observe both
audio and video signals in real time. The AT-DIS7-PROHD can be used to test 3D sources, even
though it is not a 3D monitor; however when 3D signal will be sent to it, the monitor will display
that it is receiving 3D content.
The AT-DIS7-PROHD is featured with tripod inputs on top and bottom of the unit and also the
ability to be rack-mounted (size 4U). The Rack Ears could be purchased separately.
Note: Users can purchase an optional battery which can last approximately 5 hours, model #
AT-BAT-DIS7PRO
Introduction
Applications
• Residential or Commercial Installation. The AT-DIS7-PROHD is a very handy (must have) tool
which helps to make sure that all cables, extenders, switchers, AV receivers are passing proper
signal before the installation is nished. Most installations are done far before the displays
arrive; Therefore AT-DIS7-PROHD is a perfect tool to make sure everything works. The AT-DIS7-
PROHD is recommended to be used with AT-HD800 (HDMI Signal Generator) and it will allow
installer to test every resolution, HDCP, EDID and even 3D.
• Cable, Source Manufactures. Manufactures could be using AT-DIS7-PROHD in their QC
department to make sure certain frequencies and resolutions are working.
• Monitoring. The AT-DIS7-PROHD is a perfect addition to any rack unit, allows user monitor all
signals which are going out and troubleshoot without walking around the building to look at the
display which could be 100s of feet away. User can purchase a set of rack mounting ears: AT-
RK-DIS7PRO. Total size would be 4U
• Broadcast. The AT-DIS7-PROHD is a perfect tool for any camera man or video operator who
wants to quickly see what is being recorded or view some footage. The AT-DIS7-PROHD has a
tripod connection on top and bottom.
Package Contents
• Atlona 7” PRO HD Monitor with HDMI, VGA and Component Inputs
• 5V/2.6A DC power adaptor (optional battery can be purchased Model: AT-BAT-DIS7PRO)
• VGA to Component Video Cable
• Manual
atlona.com
AT-DIS7-PROHD
Atlona 7” PRO HD Monitor with HDMI,
VGA and Component Inputs