Filter
Top Products
3
www.atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
4.1. Front Panel
1. Remote control sensor.
2. HDMI inputs: Connect your various HDMI sources to each of the HDMI input of the unit using HDMI
cables.
3. Input select/Indicators: Press the “ INPUT” button repeatedly to switch to your desired input source and
the LED will illuminate to indicate which input source is being selected.
4. Signal Enhancement/Indicator: Press the “ Signal Enhance” button to turn on this feature to improve
signal quality after long distance transmission. Press again to turn off. The LED will illuminate when the
signal is enhanced.
5. Power LED Indicator: The LED will illuminate when the power is connected.
4.2. Rear Panel
1. HDMI output: Connect the HDMI output to the HDMI input of your display using HDMI cable.
2. HDMI inputs: Connect your various HDMI sources to each of the HDMI input of the unit using HDMI
cables.
3. Power: Plug the supplied 5VDC power supply into the unit.
4. RS232: 9-pin D-sub female connector for connecting to your other control console for remote control.
PANEL DESCRIPTION
1 3 4 52
1 4 2 3