Filter
Top Products
25
www.atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
KEYBOARD TAB
AUTO TAB
Because the function buttons on this tab are the same with the ones on the front control panel, it shares the
same control operation and command format with the control panel.
Please refer to the details in Chapter 7: Operation of the Control Panel
This tab is used to test the switcher after connecting it to all the input and output devices. For example, to test
the function of an RGB64X32 matrix switcher, the Auto Tab is set as below after finishing all the connection.
Switch Mode: “AV”
INPUT: From 1 to 64
OUTPUT: From 1 to 32
Delay: 1000ms (1 second)
Click on the “START” button to perform the test, the matrix switcher will:
Transfer the signals from input channel No.1 to output channel No.1-32;
Transfer the signals from input channel No.2 to output channel No.1-32;
Transfer the signals from the input channel No.64 to the output channel No.1-32;
This switching test will perform this way one by one every second until the test is over.