ATON DH46X Network Router User Manual


 
14 ©2008 • All rights reserved.
DH46X 4 Source, 6 Zone Digital Audio Expansion Router
EXPANSION IN
Connect the Cat-5 Patch Cable included with the DH46X from the DH44’s EXPANSION OUT port
to the DH46X’s EXPANSION IN port as shown. Complete connections for expanded systems are
described in the section entitled Multi-Chassis Connections.
DH44
DH46X
Cat-5
Ethernet
Patch Cable
Figure 3-2: Expansion In
ZONE OUT
The ZONE OUT RJ-45 connectors interface with DHTP1 Amplifi ed Touchpad Controllers through
Cat-5 cables wired to the T-568A Standard. These connectors carry IR information from the
Touch Pads as well as audio information to the Touch Pads. Status information is also carried
between the DH44/DH46X chassis and the Touch Pads. While a great deal of information is
handled by the ZONE OUT connections, the connections are straightforward. Simply connect
Cat-5 cables terminated to the T-568A confi guration (Figure 3-3) from each touchpad to the
corresponding ZONE OUT connector as shown in Figure 3-4.
Note: For wire runs up to 150', the Cat-5 connections are all that is necessary. For wire
runs over 150', use the AUX POWER OUT connectors as described in the section entitled
Auxiliary Power Connector (AUX POWER OUT).
1 2 3 4 5 6 7 8
12 34 56 78
GREEN/WHITE
GREEN
ORANGE/WHITE
BLUE
BLUE/WHITE
ORANGE
BROWN/WHITE
BROWN
Shown tab
down
Figure 3-3: T-568A Wiring Standard