Filter
Top Products
Introduction
AT&T Plug&Share
™
Wireless PCI Adapter 22 Mbps Turbo 6500B4X 3
Overview
The AT&T Plug&Share
™
Wireless PCI Adapter allows you to connect any desktop computer with an avail-
able PCI slot to a compatible wireless network.
Package Contents
Please check to make sure your package contains the following items:
Plug&Share
™
Wireless PCI Adapter
22Mbps Turbo 802.11b
CD-ROM
Contains installation software and
printable versions of this User
Manual, Quick Start Guide and
Safety & Warranty Information.
Quick
Start Guide
Safety &
Warranty
Information
System Requirements:
You must have a desktop computer with the following applications & hardware:
• Windows
®
98 SE, Me, 2000 or XP
• Available PCI slot
• Intel
®
Pentium II (or higher)
• 64 MB of RAM
• CD-ROM drive
• 5 MB of available hard-disk space (60 MB to load Adobe
®
Acrobat
®
Reader
®
)
• AT&T Plug&Share
™
Wireless Router (or other 802.11b or g compliant router or access point)
STEP 1: Install the Driver and Configuration Utility
1 Do NOT install adapter first. Insert the enclosed CD-ROM into your CD-ROM drive.
2 Your CD auto-run function may start automatically. If it does not, click on the Start button. Click Run
and enter D:\autorun. (If your CD-ROM drive is not your D drive, use the appropriate drive letter.)
3 When the adapter menu screen appears, click on Install Software from the menu on the left side of
the screen.
4 The InstallShield Wizard will appear.
5 Different versions of Windows
®
will present different screens. Press Next at each screen until the
Wizard driver installation has completed.
6 Some versions will present a screen that asks about restarting your computer. Choose Yes, I will
restart my computer now.
7 Click Finish, if necessary.
Proceed to Step 2 only after the software has been correctly installed (see next page).