ATTO Technology 1550E Network Router User Manual


 
Rev 1/08
©2008 ATTO Technology, Inc. Specifications subject to change without notice
Technical Specification
Power Behind the Storage
For More Information:
www.ATTOTech.com
or to Purchase:
www.ATTOStore.com
(716) 691-1999
Gigabit Ethernet and SCSI
Gigabit Ethernet Interface
10/100/1000 Gig-E RJ45 Ethernet port
Supports IP v.4
Compliance with IEEE802.3ab Gig-E
Compliance with IEEE 802.3x Flow Control
SNMP MIB 2 support
Supports 9K Jumbo Ethernet frames
SCSI Interface
Single 68-pin SCSI connector
Ultra320 LVD SCSI—320 MB/sec. maximum throughput
Backward compatible with all single-ended SCSI devices
Supports SCSI-3 specifications
Management
Operating Environment
Operating system independent
Supports all SCSI devices including hard disk drives, tape drives, RAID controller, DVD, MO and CD libraries
Local and Network Management
ExpressNAV
TM
integrated management console for remote configuration, management and diagnostic
capabilities
Command line management access via Ethernet and RS232
Local diagnostics supported through SNMP, Telnet, and FTP
Includes support for DHCP, ICMP, and RMON
Built in memory has ECC detection and correction
User accessible reset switch
Built-in watchdog timer
Automatically detects and maps all connected devices at power on
Agency Approvals
Safety and Environmental
RoHS Compliant
Environmental & Physical Specifications
Configuration
Embedded Board
Dimensions
Embedded Board: 4.4” W x 6.4” L
Operating Environment
Temperature: 5-40° C
Humidity: 10-90% non-condensing
Power
Standard 4 pin power connector, 12V, 1.5A
Nominal power consumption: 1A @ 12V
Weight
1.5 lbs
Ordering Information
Model Number
IPBR-1550-ER0
iPBridge
TM
1550E
Appliance
iPBridge
TM
1550E