ATTO Technology FC-44ES 4-Gb Network Card User Manual


 
7 ATTO Technology Inc. Celerity FC Host Adapters Installation and Operation Manual
Celerity FC-24XL Adapter
The Celerity FC-24XL is a Fibre Channel advanced
host adapter with four independent channels of 2-Gb
connectivity and advanced functions and embedded
processing and buffering capabilities to enable data
stream manipulation, direct port-to-port transfers,
offload processing, video handling and a myriad of
other capabilities. The Integrated Offload &
Processing Center (IOPC) uses an Intel XScale®
processor core and an internal 133 MHz PCI-X data
bus for top performance and low latency. IOPC
simplifies and augments SAN fabric management,
including:
Port-to-port data streaming
• Hardware RAID
• Backup offload
• Metadata insertion
• Data protection
• Video handling
Hardware specifications
Four independent data channels, each
supporting 2-Gb Fibre Channel performance
2.125-Gigabit data transfer rates per channel
400 MB/sec. maximum full duplex throughput
per channel
Supports all FC topologies: direct fabric,
arbitrated loop and point-to-point
Flash ROM for easy field upgrades
Simultaneous multi-protocol support
IOPC specifications
Developer’s kit for OEMs
Intel IOP80331 XScale processor core
Supports up to 512 MB DDR 333 MHz SDRAM
Internal 133 MHz PCI-X bus
EDC error correction hardware capable of end-
to-end data integrity
ANSI Fibre Channel: FC-PH, FC-FCP, FC-
FCP2, FC-AL, FC-AL2, FC-PLDA, FC-FLA,
IETF-IPFC
Advanced FC capabilities
Supports SNIA HBA API
On-demand, automatic negotiation between 2-
Gb and 1-Gb Fibre Channel
Supports target and Initiator modes
• Supports Windows
FDMI and WMI
Exclusive Advanced Data Streaming (ADS
TM
)
Technology
PCI Bus Specifications
64-bit, 133 MHz PCI-X
64/32-bit, 100/66/33 MHz PCI compatible
PCI-X 1.0a compliant
• PCI 2.3 compliant
3.3V PCI signaling only
Environmental & physical specifications
Conforms to PCI full form factor standards
Length: 6.600 inches
Height: 4.200 inches
Operating Temperature: 0-45ºC (32º-113ºF)
Storage Temperature: -40º to 70ºC (-40º to
158ºF)
Relative Humidity: 5 to 95% non-condensing
+3.3 V@4.0A (max.)
100 lf/m (minimum) airflow recommended
External connectivity
Easy-to-install connection plate
Up to four shortwave optical LC SFP pluggable
transceivers
Two optical LC SFP transceivers included
External LEDs to show on-line and speed status
for each channel
Software specifications
Windows XP, 2000, Server 2003
Red Hat Linux (2.4 and 2.6 kernel)
SUSE Linux (2.6 kernel)
Mac OS X