Filter
Top Products
25
4 Updating Hardware Flash, Drivers
Your Celerity FC host adapter is shipped with the latest flash and drivers but these may need to be updated as
new versions become available. Visit the ATTO website,
www.attotech.com
, to download the latest drivers and
flash bundle.
Updating flash
Hardware flash memory may need to be updated as
new versions become available.
1 Download and install the most recent version of
the Configuration Tool from the ATTO
website. Refer to Updating the ATTO
Configuration Tool on this page.
2 Download the proper flash bundle (adapter
specific) from the ATTO website.
a. Go to www.attotech.com
b. Click on downloads.
c. Register or log in if previously registered.
d. Click on Fibre Channel Host Adapters in
the left dialog.
e. Navigate to your HBA model in the right
dialog and click on it.
f. Scroll down to and click the desired flash
bundle depending on the operating
system.
g. A download window appears. Choose
Save.
h. After the download has completed,
process the downloaded file:
• On OS X, mount the .dmg file.
• On Windows, extract the .zip file.
• On Linux, expand the .tgz file.
3 Launch the Configuration Tool.
4 In the Device window, select the adapter that
needs to be updated.
5 In the Flash window, click on the Browse
button to find the flash bundle that you
previously downloaded and extracted to your
desktop.
6 Click Update to update your flash ROM.
7 Repeat for any additional adapters installed in
the machine.
8 Reboot your system for the changes to take
effect.
Updating drivers
Update drivers by downloading the latest driver
software from the ATTO Technology website.
1Go to www.attotech.com
2 Click on downloads.
3 Register or log in if previously registered.
4 Click on Fibre Channel Host Adapters in the
left dialog.
5 Register or log in if previously registered.
6 Navigate to your HBA model in the right dialog
and click it.
7 Scroll down to and click the desired driver
depending on the operating system.
8 A download window appears. Choose Save.
9 After the download has completed, process the
downloaded file:
• On OS X, expand the .tgz file, then
double click on the installer icon.
• On Windows, run the downloaded .exe
file.
• On Linux, expand the .tgz file, then run
the install.sh installation script.
10 Follow the instructions for installing the drivers.
Updating the ATTO Configuration Tool
If you want the latest version of the ATTO
Configuration Tool, download it from the ATTO
website.
1Go to www.attotech.com.
2 Click on downloads.
3 Register or log in if previously registered.
4 Click on Fibre Channel Host Adapters in the
left dialog.
5 Register or log in if previously registered.
6 Navigate to your HBA model in the right dialog
and click it.
7 Scroll down to and click the desired ATTO
Configuration Tool depending on the
operating system.
8 A download window appears. Choose Save.