This page describes the function of the control keys and the OSD menu
structure.
The relevant menu (video or nav) will be detected automatically, depend-
ing on the input mode given by the display control line or by VCR-
connector.
On Screen Display
-5-
Monitor Settings
The color display is equipped with On-Screen Display (OSD)
prompting for the monitor settings.
There are 3 buttons on top of the monitor.
These will be used for the OSD control. They are as follows:
“Menu” = Menu
“ + “ = Plus
“ – “ = Minus
“Menu” button is used to select the desired function.
The desired function will be highlighted in red.
“+” And “-“ buttons are used to adjust the desired function.
Note: If a button has not been pressed for 5 seconds, then the
OSD menu is automatically hidden again.