Filter
Top Products
Cajun P550/P880/P882 Switch Configuration Guide
Configuring AppleTalk Routing
15-17
Adding or Deleting Interfaces to an NBP Filter
You can add or delete interfaces to an NBP filter using either the
web agent or the CLI.
Adding or
Deleting
Interfaces to an
NBP Filter Using
the Web Agent
To add or delete interfaces to an NBP filter using the web agent:
1. Select NBP Filter from the Routing > AppleTalk >
Configuration group on the web agent window. The
AppleTalk NBP Filter dialog box opens (see Figure15-8).
2. Select Edit If. The Add/Delete Interface to NBP Filter
dialog box opens (see Figure15-10).
Figure 15-10. Add/Delete Interface to NBP Filter Dialog Box
3. Select the interface to be added from the Add field pull-down
menu.
Or
Click the checkbox in the Select column for the interface
that you want to be remove.
4. Click ...
— Add to add this NBP filter to the selected interface.
— DELETE to remove this NBP filter from the selected
interface.
— CANCEL to restore previous settings.