Filter
Top Products
Cajun P550/P880/P882 Switch User Guide
Managing Intelligent Multicasting
16-19
Enabling IGMP Snooping
You can enable IGMP snooping using either the web agent or the
CLI.
Enabling IGMP
Snooping Using
the Web Agent
To enable IGMP Snooping using the web agent:
1. Select IGMP Snooping from the L2 > Intelligent Multicast
group on the web agent window. The IGMP Snooping dialog
box opens (Figure16-9).
* Note: IGMP snooping only works on VLANS that have an
IGMP interface enabled. You must also enable intelligent
multicasting on a global basis.
Figure 16-9. IGMP Snooping Dialog Box
2. Select Enable from the State field.
3. Click Apply to complete the operation or Cancel to ignore the
operation.
Enabling IGMP
Snooping Using
the CLI
To enable IGMP Snooping using the CLI, enter the following
command from Configure mode:
cajun(configure)# set igmp-snooping enable
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.