Filter
Top Products
2-30
Chapter 2
Cajun P550/P880/P882 Switch User Guide
3. Select one of the following from the Copy Destination
pull-down menu.
— Running-Config — Copies your startup configuration,
or other file located on the switch or on a TFTP server, to
your running configuration.
— Startup-Config — Copies your running configuration,
or other file located on the switch or on a TFTP server, to
your startup configuration.
— File — Copies your startup or running configuration,
another file located on the switch, or a file located on a
TFTP server to a file on the switch.
— TFTP Server — Copies your startup or running
configuration, or another file located on the switch, to a
location on a TFTP server.
* Note: If you select File or TFTP Server, you must also
provide the path and filename of the destination
file in the Source Destination field.
4. Enter the IP address of the source or destination TFTP server
in the TFTP Server IP Address field, if applicable.
5. Click Copy. The source configuration or file is copied to your
specified destination.
* Note: The Web Agent returns an
Invalid operation! error message if you
attempt to copy one of the following:
• The current running configuration to the running
configuration.
• The startup configuration to the same startup
configuration.
• The specified TFTP server to a TFTP server.
Copying Files
Using the CLI
To copy files using the CLI, enter the following command in Priv
mode:
># copy running-config +
* Note: Entering a “+” sign lists all of the applicable options for
the copy running-config command
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.