Filter
Top Products
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3 3-13
Configuring System Information
Figure 3-7. Temperature System Window
2. Enter your desired temperature warnings in the Slot 1
Sensor, and the Backplane Sensor fields.
* Note: “Slot 2” will display if the only sensor supervisor
is in slot 2.
3. Enter a temperature warning in the CPU Sensor field.
4. Click APPLY to save your changes, or CANCEL to clear
your selection.
CLI Command To configure the temperature warning systems using the CLI, enter
the following command from Configure mode:
<configure># set temperature <backplane-sensor>
<cpu-sensor> <probe> <supervisor-slot>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Beta Version 5.3 for details about this
command.
Displaying the Power System Statistics
You can display the statistics for your switch’s power system from
the either the Web Agent and the CLI.
Web Agent
Procedure
To display your switch’s power system statistics using the Web
Agent: