A-3
610-0184-095 June 14, 2001
where
<slot> is the slot number. If you specify this parameter, then all
ports on the module in slot <slot> are set the same way.
<slot-swport-range> is a slot and port range in the form of 3/1
or 3/1-5. If you specify this parameter, then only ports <swport-
range> on the module in slot <slot> are set.
{on|off} indicates whether you want the port to ignore tag
priority. Enter on for the port to ignore the tag priority.
Examples
■ To set all ports on the module in slot 3 to ignore the 802.1p
tag priority, enter:
set port ignore-tag-priority 3 on
■ To set ports 1 through 5 on the module in slot 3 to not ignore
the 802.1p tag priority, enter:
set port ignore-tag-priority 3/1-5 off
■ To set ports 1 through 5 on the module in slot 3 and port 1 on
the module in slot 6 to ignore the 802.1p tag priority, enter:
set port ignore-tag-priority 3/1-5,6/1 on
Displaying the Port Settings
Command
Use the show port command to display the settings of a port. The
syntax of the command is:
show port [{<slot>|<slot-swport-range>}
[...,{<slot>|<slot-swport-range>}]]
where
<slot> is the slot number. If you specify this parameter, then the
settings of all the ports on the module in slot <slot> are displayed.
<slot-swport-range> is a slot and port range in the form of 3/1
or 3/1-5. If you specify this parameter, then settings for only the
ports <swport-range> on the module in slot <slot> are displayed.
