Filter
Top Products
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 4-37
Using VLANs, Spanning Tree, Hunt Groups, and VTP Snooping
4. Select Enable from the Load Sharing pull-down menu to
enable Load Sharing for the Hunt Group.
5. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Adding Ports to the Hunt Group
Once you have created and named a Hunt Group, you can add as
many additional ports as needed to the Hunt Group. The next two
Hunt Group configuration steps, adding physical ports, and switch
ports to the Hunt Group, can be done using the Web Agent or the
CLI.
Using the Web
Agent
To add ports to a hunt group using the Web Agent:
1. Select Configuration from the Modules and Ports folder
on the Web Agent window. The Module Information
window opens (Figure 4-20).
Figure 4-20. Module Information Window
2. Select a port number from the Ports column. The Physical
Port Configuration window opens (Figure 4-21).