Filter
Top Products
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 5-17
Configuring Port Parameters
Configuring Physical Port Parameters on Fast Ethernet Ports
You can configure ports on a Fast Ethernet module using either the
Web Agent or CLI commands.
Web Agent
Procedure
To configure ports on a Fast Ethernet module using the Web Agent:
1. Select Configuration from Modules & Ports group on the
Web Agent window. The Module Information dialog box
opens (Figure 5-1).
2. Select the checkbox in the Slot column next to the Fast
Ethernet module to change the Name field, if desired, change
the module name then Click the APPLY button.
3. Select the number in the Ports column for the Fast Ethernet
module that you want to configure. The Physical Port
Configuration window opens (Figure 5-4).
Figure 5-4. Physical Port Configuration Window for the Fast
Ethernet Module installed in Slot 3 (partial view)
4. By default the checkbox is checked in the Enable column. To
change the enable remove the check in the checkbox.
5. If you change the enable checkbox Click APPLY to save
your settings, or CANCEL to restore previous settings.
6. Select a port name from the Name field (for example, Port
6.1). The Detailed Physical Port Configuration dialog box
for that port opens (Figure 5-5).