Filter
Top Products
10-4 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide,v5.3.1
Chapter
Modifying RIP Interfaces
You can modify RIP interfaces from either the Web Agent or the
CLI.
Using the Web
Agent
To modify RIP interfaces using the CLI from the Web Agent:
1. Select Interfaces from the Routing > IP > RIP group on the
Web Agent window. The RIP Interfaces dialog box opens
(Figure 10-2).
Figure 6-73. RIP Interfaces Dialog Box
2. Refer to Table 6-50 to modify the RIP interfaces dialog box
parameters:
Table 6-50. RIP Interface Dialog Box Parameters
Parameter Allows you to...
Select Select the RIP interface to be modified.
Interface Displays an interface from a list of interfaces that you previously
configured.
Network
Address
Displays an IP address to be associated with the displayed interface.
Mode Specify the RIP State. Different states include:
• talk only (only send RIP information on this interface)
• listen only (only receive RIP information on this interface)
• talk/listen (both send and receive RIP information on this
interface)
Talk/Listen is the default setting.