Filter
Top Products
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1 11-19
Configuring the OSPF Routing Protocol
Figure 6-85. Add OSPF Summary Dialog Box
3. Refer to Table 6-57 for details about the Add OSPF
Summary dialog box parameters:
4. Click CREATE to save the new OSPF summary, or CANCEL
to ignore the new summary.
Using the CLI To create a new OSPF summary using the CLI, enter the following
command from Configure mode:
<configure router: ospf># area <area id> range
<ip address><mask><no-advertise>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3 for details about this command.
Table 6-57. Add OSPF Summary Dialog Box Parameters
Parameter Definition
Area Select the area ID of the area from which the routes
are aggregated (summary IP address).
Network
Address
Enter the IP address of the network to be advertised.
Mask Enter the subnet mask of the network to be
advertised.
Advertise Select the ability to suppress (disable) or enable
advertisements of this summary. When suppressing,
advertisements of IP routes in this range are also
suppressed.