Filter
Top Products
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 12-21
Configuring IPX Routing
3. Refer to Table 6-70 to determine the search parameters:
4. Click on the Search button to start:
— If the available routes are found they are displayed in the
IPX Route Table dialog box.
— If no routes are available, a message is displayed in the
IPX Route Table dialog box.
Displaying the IPX Route Table
To display the IPX route table:
1. Perform an IPX Route Table search as described in "Searching
the IPX Route Table", section. If available routes are found
they are displayed in the IPX Route Table dialog box.
2. Refer to Table 6-71 to review your configuration:
Table 6-70. IPX Route Table Search Parameters
Parameter Allows you to ...
Source Search the IPX route table using of the following
parameters:
• RIP - RIP routing updates
• Static - User configuration
• Local - Directly connected routes
Once you select a parameter, you can search to find the
routes associated with that parameter.
Interface Search the IPX Route table using the interface associated
with the next-hop to the IPX network.
Network Number Search the IPX Route table using the IPX Network address
(hexadecimal number) you specify.
Table 6-71. IPX Route Table Parameters
Parameter Defines the...
Select Parameter selected.
Network Network number (in hex) of the IPX network.
Interface Interface associated with the IPX network.
Source Method by which the network was learned. For
example, RIP, local, or static.
TTL Number of seconds before the route expires.