Filter
Top Products
15-12 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Figure 6-125. AppleTalk Static Route Dialog Box
2. Select CREATE to add a new static route. The Add
AppleTalk Static Route dialog box opens
(Figure 6-126).
Figure 6-126. Add AppleTalk Static Route Dialog Box
3. Refer to Table 6-84 to configure the Add AppleTalk Static
Route dialog box parameters.
Table 6-84. Add AppleTalk Static Route Dialog Box Parameters
Parameter Definition
Network Range
Start
Enter the starting network number. The network
number specifies the range of AppleTalk network
numbers for extended networks. Each number in the
range must be an integer between 1 and 65279.
Note: Network Range Start must be less than or
equal to Network Range End.
Network Range
End
Enter the ending network number. The network
number specifies the range of AppleTalk network
numbers for extended networks. Each number in the
range must be an integer between 1 and 65279.
Network
Number
Enter the next hop network number. This number
specifies the network number of the next hop router
for the network range.