Filter
Top Products
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 15-15
Configuring AppleTalk Routing
9. Enter the type to be associated with the static route in the
Type field.
10. Click APPLY to save the new zone.
Using the CLI To edit an AppleTalk static route using the CLI, enter the following
command from Interface mode:
(config if-:<interface-name>)# appletalk static
cable-range <options>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
Deleting an AppleTalk Static Route
You can delete an AppleTalk static route using either the Web Agent
or the CLI.
Using the Web
Agent
To delete an AppleTalk static route using the Web Agent:
1. Select Static Route from the Routing > AppleTalk >
Configuration group on the Web Agent window. The
AppleTalk Interfaces dialog box opens (Figure 6-129).
Figure 6-129. AppleTalk Static Route
2. Select the AppleTalk static route that you want to delete from
the Select column.
3. Click DELETE to remove the AppleTalk static route.
Using the CLI To delete an AppleTalk static route using the CLI, enter the
following command in Configure mode:
> (config if-<interface-name>:)# no appletalk
static