Filter
Top Products
15-20 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Using the CLI To add interfaces to an NBP filter using the CLI, enter the following
command from Interface mode:
(config-if <interface-name>:)# appletalk access-
list <access-list-number> <permit | deny> nbp
<string>
To delete interfaces to an NBP filter using the CLI, enter the
following command from Configure mode:
> (config-if <interface-name>:)# no appletalk
access-list <access-list-number> <permit | deny>
nbp <string>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
Creating an AppleTalk Zone Filter
You can create an AppleTalk Zone Filter using either the Web Agent
or the CLI.
Using the Web
Agent
To create an AppleTalk zone filter using the Web Agent:
1. Select Zone Filter from the Routing > AppleTalk >
Configuration group on the Web Agent window. The
AppleTalk Zone Filter dialog box opens
(Figure 6-134).
Figure 6-134. AppleTalk Zone Filter Dialog Box
2. Select CREATE. The Add AppleTalk Zone Filter dialog
box opens (see Figure 6-135).