Filter
Top Products
15-24 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Using the CLI To add interfaces to a zone filter using the CLI, enter the following
command from Interface mode:
(config-if <interface-name>:)# appletalk access-
list <access-list-number> <permit | deny> zone
<string>
To delete interfaces to an zone filter, enter the following command
from Interface mode:
(config-if <interface-name>:)# no appletalk
access-list <access-list-number> <permit | deny>
zone <string>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
Viewing AppleTalk Statistics
This section includes:
■ Viewing AppleTalk Global Statistics
■ Viewing the AppleTalk Interface Statistics Table
■ Using the CLI
■ Viewing AppleTalk Route Table Statistics
■ Viewing the AppleTalk ARP Cache Table
■ Viewing the AppleTalk Zone Table
■ Viewing AppleTalk Zone Table Statistics
■ Viewing the AppleTalk NBP Table
Viewing AppleTalk Global Statistics
You can view AppleTalk global statistics using either the Web Agent
or the CLI.
Using the Web
Agent
To view AppleTalk global statistics using the Web Agent:
1. Select Global Statistics from the Routing > AppleTalk >
Display group on the Web Agent window. The AppleTalk
Global Statistics dialog box opens (Figure 6-137).