Filter
Top Products
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 16-9
Managing Intelligent Multicasting
3. Refer to Table 6-96 for an explanation of the Router Port
Display/Configuration Dialog Box parameters.
Table 6-96. Router Port Display/Configuration Dialog Box
Parameters
4. Select a router port from the Port column and click DELETE
to delete the port, or CANCEL to restore previous settings.
Using the CLI To display router ports using the CLI, enter the following command
from User mode:
# show intelligent-multicast router-port
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
Configuring Static Router Ports
You can configure Static Router ports using either the Web Agent or
the CLI.
Using the Web
Agent
To configure a static router port using the Web Agent:
1. Select Global Configuration from the L2 Switching >
Intelligent Multicast group on the Web Agent window.
The Intelligent Multicast Global Configuration dialog
box opens (Figure 6-145).
* Note: You must enable intelligent multicasting on a
global basis to make your static router port
configuration active. See "Configuring Global
Intelligent Multicasting", earlier in this chapter.
Parameter Definition
Port Displays the switch port configured as a
router port.
VLAN Displays which VLAN the router port is
bound to.
Application Displays the active applications of the
router port. The applications include:
• Mgmt (Static)
• IGMP
• LGMP
• CGMP