Filter
Top Products
19-20 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Using the CLI To remove a port mirror from a switch in Fabric mode 2, use the
following CLI command from configure mode:
<configure># clear port mirror Fabric_mode2
channel <channel>
For more information about this command see “set port mirror
Fabric_mode2” in Chapter 19, “Port,” of the Command Reference
Guide for the Avaya P550R, P580, P880, and P882 Multiservice
Switches, v5.3.1.
Viewing Information about a Fabric Mode 2 Port Mirror
Web Agent
Procedure
To view information about a Fabric mode 2 port mirror:
1. Expand the Modules & Ports folder.
2. Click Port Mirroring.
The Port Mirroring Information page opens. This page displays
information about all port mirrors that are setup.
CLI Command To view information about a Fabric mode 2 port mirror, use the
following CLI command:
<configure># show port mirror Fabric_mode2
This command displays the source ports, mirror port, direction being
mirrored, sampler type, and maximum packet per second for all port
mirrors that are currently set up.