Filter
Top Products
2-38 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1
Chapter 2
Figure 2-20. PPP Console Configuration Window.
3. Select a baud rate from the Baud Rate field pull-down
menu that is different from the one already selected.
4. Select an option from the Flow Control field pull-down
menu. The options are: None and Xon/Xoff.
* Note: You can only change the baud rate and flow
control parameters after you configure the serial
port as a PPP console.
5. Enter the modem initialization command in the Modem
Init Cmd field. The default modem configuration init
command is AT&D0SO=1.
Refer to Table 2-8 for a definition of the Modem
Configuration Init command parameters.
Table 2-8. Modem Configuration String Parameters
Parameter Definition
&D0 Disable DTR
S0=1 Auto-answer mode (one ring)
CD follows carrier Depends on modem
1 of 2