Avaya P880 Switch User Manual


 
3-4
Chapter 3
Cajun P550/P880/P882 Switch User Guide
Figure 3-3. SNTP Client Configuration Dialog Box
3. Select Enable from the Enable State pull-down menu. The
default is Disable.
4. Enter the server IP address in the Server IP address field for
the switch on which you want to enable SNTP.
5. Click APPLY to save your changes, or CANCEL to clear your
selection.
Enabling SNTP Using the CLI
To enable SNTP on your switch using the CLI, enter the following
command in Configure mode:
> (configure)# sntp server <ip-address>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Setting Summer
Time Hours
Summer Time Hours, also referred to as Daylight Savings Time
(DST), is the strategy of moving clocks ahead to provide greater
amounts of daylight in the afternoon and to standardize time with
other parts of the world. In many parts of the world, the Summer
Time Hours algorithm is based on a standardized rule. For example,
in the Western hemisphere, the rule used by most locations in
Canada, Mexico, and the United States is to set clocks forward by
one hour at 2:00 a.m. on the first Sunday in April and back an hour
at 2:00 a.m. on the first Sunday in October annually. Many
countries in Europe and Asia follow similar rules. The offset, or
amount of time by which the clock is set forward or backward,
varies from country to country.